OZEN 18CF2HDS 100mm AGILE 18S S-LOC Tripod System
Get a tripod system that stands up to the demands of ENG and EFP production with the 100CF2HD 100mm Carbon Fiber Tripod & Agile 18S Fluid Head System with S-Loc camera interface from OZEN. Comprising a 100CF2HD 100mm two-stage, heavy-duty carbon fiber tripod and an Agile 18S fluid head, this system works with 4.4 to 48.4 lb payloads. It offers 16-step counterbalance, 7/7 + 0 pan/tilt fluid drag, and working heights ranging from 28.2 to 68.2". The 100CF2HD comes equipped with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces. Included with the system is a SoftCase 100HD2, which has a carry strap and an internal pouch for storing the included pan bars.
OZEN 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod
Give your camera solid feet to stand on with the 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod from OZEN. Designed for heavy-payload and high-fluid-drag applications, this two-stage tripod supports up to 99 pounds and offers working heights ranging from 20 to 60". For greater rigidity, the 22mm diameter carbon fiber tripod leg tubes are pin-secured to their anchors—no glued joints. Flip brake levers are used to lock the legs into place, making for fast deployment and stowage. Moreover, the 100CF2HD comes equipped with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces.
- For use with separately available 100mm fluid heads
- Carbon fiber leg tubes are lighter and stiffer than aluminum, resist damage from minor impacts, and have less flex when using high increments of fluid drag
- Carbon fiber tubes are pinned to their joints, not glued
- Flat and angled spreader positions
- Payload capacity of 99 pounds
- Conspicuous red flip brake levers for fast deployment and stowage
- Brake adjustment mechanism
OZEN Agile 18S Fluid Head
Smooth your pans and tilts with the Agile 18S Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 18S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 16 steps. The Agile 18S's versatile design enables you to quickly change camcorder configurations within a payload range of 4.4 to 48.4 pounds.
The Agile 18S is equipped with a 7/7 + 0 fluid drag mechanism and offers a tilt range of 90 to -80°. The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.
- Ergonomic pan/tilt fluid drag and counterbalance controls
- Distinguishable, 90° opposed pan and tilt brakes
- Replaceable pan bar rosettes for longer fluid head usability
- Illuminated bubble level
- Constructed of CNC-machined and anodized aluminum with stainless steel fasteners
- Two telescopic pan bars included
OZEN Soft Case for Two-Stage Heavy-Duty 100mm Systems for 100HD2 Tripod
The OZEN Soft Case for Two-Stage Heavy-Duty 100mm Systems for 100HD2 Tripod is a spare/replacement part. Users will appreciate the internal pouch for storing a pan bar and carry strap.
Replacement Soft Case 100HD2 included w/systems configured with 100AL2HD or 100CF2HD tripod